Valves - Directional Controls - Hot Oil Shuttle

HS10-42

HOT OIL SHUTTLE VALVE

Overview

Description

The HS10-42 is a screw-in, cartridge style, spool type, closed in transition, 2-position, 3-way hot oil shuttle valve for use with general purpose hydraulic fluids. The valve CAN be utilized on hydrostatic transmissions to direct charge pump oil to a heat exchanger or to tank

Operation

With internal piloting at port 1, 2 or 4, the s10-42 will direct oil flow from the port opposite of the port piloted to port 3, thus removing oil from the low-pressure side for cooling or filtration purposes. The valve is springless, relying solely on the internal pilot pressure signal to shift to either side. Flow paths are closed in transition.

Features

  • Hardened parts for long life.
  • Industry-common cavity.

Ratings

Pressure Ratings
Pressure rating
207 bar (3000 psi)
Flow Ratings
Flow rating
See graph
Maximum internal leakage
115 ml/min (7 in³/min)
207 bar (3000 psi)
Temperature Ratings
Maximum operating fluid temperature
-40 to 100 °C (-40 to 212 °F) With buna N seals
-26 to 204 °C (-15 to 400 °F) With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F) With polyurethane and urethane seals
Storage temperature
-40 to 70 °C (-40 to 160 °F)
Ambient temperature
-40 to 90 °C (-40 to 194 °F)

Operating Parameters

Fluids
Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid viscosity range
7.4 to 420 cSt
Maximum operating contamination level
18/16/13 per ISO 4406

Properties

Cartridge weight
0.11 kg (0.25 lb)
Internal wetted surface area
106 cm² (16.4 in²)

Performance

HS10-42_Perf_Chrt

Dimensions

HS10-42_Dim_Dwg

Materials

Materials

Cartridge: Weight: 0.15 kg (0.32 lb); Steel with Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Polyurethane seals optional for HS50-42 high pressure operation.

Standard Ported Body : Weight: 0.34 kg (0.75 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron body required for HS50-42 high pressure operation; dimensions may differ.

Installation Specifications

Cavity
VC10-4
Cartridge installation torque
32.5 to 35.3 N-m (24 to 26 ft-lb)
Maximum allowable torque
67.8 N-m (50 ft-lb)
Orientation restriction
None

Accessories

Seal kit
SK10-4N-MM Buna N
SK10-4V-MM Fluorocarbon
Sp10-4p-mm Polyurethane
SK10-4U-O0 Urethane

Order code

POSITION
CODE
DESCRIPTION
HS10-42-H-J
H
Line Body
H
0
No Body
H
6T
Aluminum SAE 6
H
8T
Aluminum SAE 8
H
6TD
Ductile Iron SAE 6
J
Seal
J
N
Buna-N
J
V
Fluorocarbon
J
P
Polyurethane
J
U
PPDI Urethane
HS10-42_Order